FRI3OIL works with any type of refrigerant and can be used on any type / size of refrigeration or air conditioning system. FRI3OIL is thus ideal for refrigerant/oil conversions (retrofits of MO/POE Oil) or the removal of all contaminants following a compressor motor burnout

Component Parts and Cleansing Actions
1. Suction Cylinder
2. Rise & Fall of Liquid Refrigerant
3. Water
4. Liquid Refrigerant
5. Oils + Acids + Suspended Particles
6. User Process Control and Monitoring Visual Sight Glass
7. Liquid Separation Vessel
8. Suction Pressure
9. Compressor
10. Discharge Pressure
11. Expansion Device

NEW SYNTHETIC OILS
The new synthetic oils are very hygroscopic. Their exposure to moisture within the surrounding air must be avoided.  The FRI3OIL System enables these oils to be injected to refrigeration systems with minimal exposure to airborne moisture thus maintaining oil integrity.

SUBSTANTIAL COST SAVING
The FRI3OIL System enables the original refrigerant to be adequately cleaned on site to a level that allows it to be re-used. Until now, it was necessary to recover the corrupted refrigerant to recovery cylinders, transport this to a specialist company who would charge £5/kg (or more) to destroy the entire quantity, attain and complete the Refrigerant Waste Transfer Note and finally purchase replacement refrigerant at £10/kg or more.
 

ENVIRONMENTAL SAVING
The FRI3OIL System saves substantial energy by eliminating the need to transport the waste refrigerant, transport to deliver new refrigerant and the energy required for destruction. It is only waste contaminated system oil that requires disposal.
 

• Miscibility & Solubility of refrigerant and oils, coupled with that of acids and water
• Refrigerant / Oil / Acid / Water decanting and separation through evaporation